The purpose of this assignment is to expose you to a range of engineering graphics activities in a small project. This lab will be spread out over a couple of weeks. Below are the requirements of the lab as well as the evaluation rubric.

Objectives

After this lab, each student will be able to:

Sketch a detail drawing.
Sketch an assembly drawing.
Model an object with a sweep.
Build symmetry into a sketch.
Create a detail drawing in Creo.
Create an assembly drawing in Creo.

Lab Information

Part - File name: 106-406-230-001
Common Name: PIPE PLATE FITTING
Creo Material Specification: Low Carbon Steel

Add geometric dimensioning and tolerances. See Pipe Strap Geometric Dimensioning & Tolerances

Part - File name: 106-406-230-002
Common Name: THREADED STRAP
Creo Material Specification: High Carbon Steel

Add a 0.75 X 45° CHAMFER to threaded ends.
Apply threads. See table of Thread Sizes and Dimensions for minor diameter (tap drill size) of thread.

Part - File name: 007-154-230-009
Common Name: M8 X 1.25 HEX JAM NUT
Creo Material Specification: High Carbon Steel

Insert into assembly using Standard Content
- Create a dummy ANSI-Metric Hex Cap Screw (M8x1.25)
- Select Nut Checkbox, ANSI-METRIC HEX NUT, Style 1
- Open created nut. Save a Copy. Use new Copy

Assembly - File name: 106-406-230-801

Common Name: HOLD DOWN PIPE STRAP

Requirements		Possible Points	Points Earned
Create a detail sketch of each part. Each sketch will be evaluated based on the following criteria: appropriate views. completeness of dimensions. line quality. neatness.	Sketch of PLATE	7
	Sketch of STRAP	7
	Sketch of HEX HD JAM NUT	6
Create solid models of each part. The models will be evaluated based on the following criteria: correct file naming conventions. orientation of part relative to Front, Horizontal, and Profile planes. correct design intent built into each sketch/part. sketches are completely constrained. appropriate material is applied to part. correct sizes are applied to all features.	Solid model of PLATE	10
	Solid model of STRAP	10
	Solid model of HEX HD JAM NUT	10
Create an assembly of the PIPE STRAP. Creo assembly will be evaluated on the following criteria: orientation of assembly. correct order of parts added to assembly. correctness of mates between parts.	Creo assembly of PIPE STRAP	5
Create a Creo detail drawing of each part. Each drawing will be evaluated based on the following criteria: appropriate views. completeness of dimensions. correct information in titleblock. appropriate use of geometric dimensions. appropriate application of notes.	Creo detail drawing of PLATE	15
	Creo detail drawing of STRAP	15
Create Creo assembly drawing. The drawing should include: appropriate layout of the assembly. a bill of materials with columns for ITEM, QTY, DESCRIPTION, PART NUMBER, and MATERIAL. item labels that identify each part in the assembly. correct information in titleblock.	Creo assembly drawing of the PIPE STRAP ASSEMBLY	15
TOTAL		100